Intellok Safe Keypad Replacement Verified Verified <SECURE>

For IL-201/300: press Program (or P ) → default code → # → new code → # .

Look for hidden screws behind the battery cap or gently pry off the faceplate sticker if screws are not visible. Unscrew the housing from the safe door. intellok safe keypad replacement verified

Press and hold the "0" key for 10–15 seconds. This drains any residual power from the motherboard. For IL-201/300: press Program (or P ) →

The keypad lights up and accepts the code but fails to signal the internal solenoid. Verified Compatibility Checklist Press and hold the "0" key for 10–15 seconds

Gently pull the keypad away from the safe door. You will see a thin ribbon wire or bundle of cables feeding through a hole in the safe door. Carefully disconnect the modular plastic plug connecting the exterior keypad to the internal wire harness. Do not pull on the wires directly; pull from the plastic connector housing. Step 3: Swap the Mounting Plate (If Necessary)

Look for kits that include 2 override keys as a fail-safe measure if the electronics fail again. Step-by-Step Replacement Guide

: Mount the new unit, feed the wire through, and reconnect it to the lock pack. Standard replacements like the Lagard Basic 2