The V2000-C tracks users via numbered from 1 to 2000 . Assigning specific User IDs is highly recommended so you can delete lost cards without needing the physical card in hand. Adding Users (Card or Fob Only) Enter programming mode. Press 1 . Enter a unique User ID (e.g., 0001 to 2000 ) followed by # .
is a standalone, single-door security solution designed to manage building entry using RFID cards, digital keypads, or a combination of both . Capable of storing up to , this device features high-speed card recognition under 0.1 seconds, Wiegand 26 protocols, a rugged enclosure, and built-in anti-tamper security mechanisms. V2000-c Rfid Access Control User Manual
A: No. The reader hardware is specific to one frequency. Check your model: V2000-c-EM (125kHz) or V2000-c-MF (13.56MHz Mifare). The V2000-C tracks users via numbered from 1 to 2000
Re-enter the to verify, then press # . Step 3: Setting the Access Mode Press 1
The master code is now safely reset back to the default 999999 .
The LED will flash yellow rapidly. You are now in admin mode. All commands below assume you are in this state.